nanoFramework.Iot.Device.Sps30 1.1.790

Prefix Reserved
There is a newer version of this package available.
See the version list below for details.
dotnet add package nanoFramework.Iot.Device.Sps30 --version 1.1.790
                    
NuGet\Install-Package nanoFramework.Iot.Device.Sps30 -Version 1.1.790
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Sps30" Version="1.1.790" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.Sps30" Version="1.1.790" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.Sps30" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.Sps30 --version 1.1.790
                    
#r "nuget: nanoFramework.Iot.Device.Sps30, 1.1.790"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#:package nanoFramework.Iot.Device.Sps30@1.1.790
                    
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.790
                    
Install as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.790
                    
Install as a Cake Tool

Sensirion SPS30 Particulate Matter Sensor

This is a library to interact with the Sensirion SPS30 Particulate Matter Sensor. Currently, only the UART interface using the SHDLC protocol is implemented. The SPS30 also supports I2C.

sps30-image.png

Documentation

  • The datasheet for this sensor can be found here

Usage for the UART interface

Important: make sure you properly setup the UART pins for ESP32 before creating the SerialPort. For this, make sure you install the nanoFramework.Hardware.Esp32 NuGet and use the Configuration class to configure the pins:

Configuration.SetPinFunction(4, DeviceFunction.COM2_TX);
Configuration.SetPinFunction(15, DeviceFunction.COM2_RX);

Initialize the SerialPort, wrap it in the ShdlcProtocol, then pass to the Sps30Sensor:

var serial = new SerialPort("COM2", 115200, Parity.None, 8, StopBits.One);
var shdlc = new ShdlcProtocol(serial, timeoutInMillis: 10000);
var sps30 = new Sps30Sensor(shdlc);

Use the sps30 to interact with the sensor, e.g.:

var version = sps30.ReadVersion();
Debug.WriteLine($"SPS30 detected: {version}");

Collect a measurement reliably:

try { sps30.StopMeasurement(); } catch { } // In case already measuring from a previous run
sps30.StartMeasurement(MeasurementOutputFormat.Float);
Thread.Sleep(5000); // SPS30 requires some time before it can sample data
var measurement = sps30.ReadMeasuredValues();
Debug.WriteLine($"Measurement: {measurement}");

The above would output the following:

SPS30 detected: ID=00080000, serial=4E1AD1BB796C64C5, version=Firmware V2.1, Hardware V7, SHDLC V2.0, status=RawRegister: 0, FanSpeedOutOfRange: False, LaserFailure: False, FanFailureBlockedOrBroken: False, cleaninginterval=604800
Measurement: MassConcentration [µg/m³] PM1.0=2.00064229965, PM2.5=5.78215932, PM4.0=8.74958038, PM10.0=9.3430643, NumberConcentration [#/cm³] PM0.5=5.54537582, PM1.0=12.034433364, PM2.5=15.72880268, PM4.0=16.44550895, PM10.0=16.58645629, TypicalParticleSize[nm]=675.40591955

Check out the sample for more information.

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.1.880 178 4/24/2025
1.1.869 190 4/2/2025
1.1.864 182 4/2/2025
1.1.852 184 3/11/2025
1.1.846 185 3/10/2025
1.1.838 130 3/3/2025
1.1.822 140 2/26/2025
1.1.790 129 2/5/2025
1.1.775 138 2/4/2025
1.1.772 141 2/4/2025
1.1.755 129 1/31/2025
1.1.743 125 1/20/2025
1.1.737 111 1/13/2025
1.1.729 108 1/8/2025
1.1.718 120 12/30/2024
1.1.704 124 12/18/2024
1.1.696 118 12/16/2024
1.1.673 133 10/23/2024
1.1.662 141 10/11/2024
1.1.656 127 10/3/2024
1.1.639 155 9/6/2024
1.1.631 128 8/28/2024
1.1.613 157 8/9/2024
1.1.601 123 7/26/2024
1.1.590 141 7/17/2024
1.1.573 152 6/19/2024
1.1.570 145 6/14/2024
1.1.548 138 5/15/2024
1.1.536 146 4/15/2024
1.1.514 156 3/22/2024
1.1.494 137 2/28/2024
1.1.462 238 1/5/2024
1.1.458 167 12/20/2023
1.1.436 170 11/10/2023
1.1.416 134 11/8/2023
1.1.403 159 10/6/2023
1.1.396 159 9/27/2023
1.1.384 166 9/6/2023
1.1.378 177 8/16/2023
1.1.369 178 8/2/2023
1.1.363 175 7/28/2023
1.1.357 189 7/19/2023
1.1.354 179 7/14/2023
1.1.345 170 6/21/2023
1.1.341 173 6/14/2023
1.1.337 177 6/7/2023
1.1.335 168 6/2/2023
1.1.329 172 5/26/2023
1.1.313 180 5/12/2023
1.1.302 174 5/10/2023
1.1.297 176 5/3/2023
1.1.273 252 3/17/2023
1.1.267 267 3/10/2023
1.1.263 261 3/8/2023
1.1.259 290 2/27/2023
1.1.256 300 2/24/2023
1.1.253 291 2/22/2023
1.1.222 338 1/9/2023
1.1.212 330 1/5/2023
1.1.208 333 1/3/2023
1.1.203 344 12/28/2022
1.1.159 412 11/14/2022
1.1.158 384 11/13/2022
1.1.153 398 11/5/2022
1.1.141 429 10/25/2022
1.1.128 425 10/22/2022
1.1.117 453 10/10/2022
1.1.114 442 10/8/2022
1.1.89 463 9/16/2022
1.1.87 520 9/15/2022
1.1.63 438 9/3/2022
1.1.47 461 8/15/2022
1.1.40 466 8/6/2022
1.1.38 473 8/5/2022
1.1.35 446 8/4/2022
1.1.28 458 8/1/2022
1.1.13 467 7/24/2022
1.1.10 456 7/23/2022
1.0.29.3202 474 7/7/2022
1.0.20.52556 442 6/30/2022
1.0.8.35854 492 6/26/2022
1.0.3.8772 455 6/24/2022
1.0.1.57221 465 6/23/2022
0.0.0 473 6/16/2022