nanoFramework.Iot.Device.Sps30 1.1.458

Prefix Reserved
There is a newer version of this package available.
See the version list below for details.
dotnet add package nanoFramework.Iot.Device.Sps30 --version 1.1.458
                    
NuGet\Install-Package nanoFramework.Iot.Device.Sps30 -Version 1.1.458
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Sps30" Version="1.1.458" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.Sps30" Version="1.1.458" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.Sps30" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.Sps30 --version 1.1.458
                    
#r "nuget: nanoFramework.Iot.Device.Sps30, 1.1.458"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#:package nanoFramework.Iot.Device.Sps30@1.1.458
                    
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.458
                    
Install as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.458
                    
Install as a Cake Tool

Sensirion SPS30 Particulate Matter Sensor

This is a library to interact with the Sensirion SPS30 Particulate Matter Sensor. Currently, only the UART interface using the SHDLC protocol is implemented. The SPS30 also supports I2C.

sps30-image.png

Documentation

  • The datasheet for this sensor can be found here

Usage for the UART interface

Important: make sure you properly setup the UART pins for ESP32 before creating the SerialPort. For this, make sure you install the nanoFramework.Hardware.Esp32 NuGet and use the Configuration class to configure the pins:

Configuration.SetPinFunction(4, DeviceFunction.COM2_TX);
Configuration.SetPinFunction(15, DeviceFunction.COM2_RX);

Initialize the SerialPort, wrap it in the ShdlcProtocol, then pass to the Sps30Sensor:

var serial = new SerialPort("COM2", 115200, Parity.None, 8, StopBits.One);
var shdlc = new ShdlcProtocol(serial, timeoutInMillis: 10000);
var sps30 = new Sps30Sensor(shdlc);

Use the sps30 to interact with the sensor, e.g.:

var version = sps30.ReadVersion();
Debug.WriteLine($"SPS30 detected: {version}");

Collect a measurement reliably:

try { sps30.StopMeasurement(); } catch { } // In case already measuring from a previous run
sps30.StartMeasurement(MeasurementOutputFormat.Float);
Thread.Sleep(5000); // SPS30 requires some time before it can sample data
var measurement = sps30.ReadMeasuredValues();
Debug.WriteLine($"Measurement: {measurement}");

The above would output the following:

SPS30 detected: ID=00080000, serial=4E1AD1BB796C64C5, version=Firmware V2.1, Hardware V7, SHDLC V2.0, status=RawRegister: 0, FanSpeedOutOfRange: False, LaserFailure: False, FanFailureBlockedOrBroken: False, cleaninginterval=604800
Measurement: MassConcentration [µg/m³] PM1.0=2.00064229965, PM2.5=5.78215932, PM4.0=8.74958038, PM10.0=9.3430643, NumberConcentration [#/cm³] PM0.5=5.54537582, PM1.0=12.034433364, PM2.5=15.72880268, PM4.0=16.44550895, PM10.0=16.58645629, TypicalParticleSize[nm]=675.40591955

Check out the sample for more information.

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.1.889 109 7/28/2025
1.1.880 199 4/24/2025
1.1.869 208 4/2/2025
1.1.864 200 4/2/2025
1.1.852 201 3/11/2025
1.1.846 202 3/10/2025
1.1.838 147 3/3/2025
1.1.822 155 2/26/2025
1.1.790 146 2/5/2025
1.1.775 156 2/4/2025
1.1.772 157 2/4/2025
1.1.755 146 1/31/2025
1.1.743 140 1/20/2025
1.1.737 127 1/13/2025
1.1.729 126 1/8/2025
1.1.718 137 12/30/2024
1.1.704 140 12/18/2024
1.1.696 136 12/16/2024
1.1.673 149 10/23/2024
1.1.662 157 10/11/2024
1.1.656 143 10/3/2024
1.1.639 173 9/6/2024
1.1.631 145 8/28/2024
1.1.613 178 8/9/2024
1.1.601 139 7/26/2024
1.1.590 156 7/17/2024
1.1.573 168 6/19/2024
1.1.570 163 6/14/2024
1.1.548 154 5/15/2024
1.1.536 161 4/15/2024
1.1.514 170 3/22/2024
1.1.494 151 2/28/2024
1.1.462 256 1/5/2024
1.1.458 181 12/20/2023
1.1.436 178 11/10/2023
1.1.416 143 11/8/2023
1.1.403 168 10/6/2023
1.1.396 169 9/27/2023
1.1.384 182 9/6/2023
1.1.378 195 8/16/2023
1.1.369 196 8/2/2023
1.1.363 194 7/28/2023
1.1.357 208 7/19/2023
1.1.354 199 7/14/2023
1.1.345 189 6/21/2023
1.1.341 194 6/14/2023
1.1.337 198 6/7/2023
1.1.335 188 6/2/2023
1.1.329 194 5/26/2023
1.1.313 202 5/12/2023
1.1.302 195 5/10/2023
1.1.297 197 5/3/2023
1.1.273 275 3/17/2023
1.1.267 291 3/10/2023
1.1.263 284 3/8/2023
1.1.259 316 2/27/2023
1.1.256 326 2/24/2023
1.1.253 315 2/22/2023
1.1.222 363 1/9/2023
1.1.212 355 1/5/2023
1.1.208 357 1/3/2023
1.1.203 368 12/28/2022
1.1.159 437 11/14/2022
1.1.158 410 11/13/2022
1.1.153 426 11/5/2022
1.1.141 455 10/25/2022
1.1.128 451 10/22/2022
1.1.117 479 10/10/2022
1.1.114 468 10/8/2022
1.1.89 489 9/16/2022
1.1.87 546 9/15/2022
1.1.63 465 9/3/2022
1.1.47 487 8/15/2022
1.1.40 492 8/6/2022
1.1.38 499 8/5/2022
1.1.35 472 8/4/2022
1.1.28 484 8/1/2022
1.1.13 495 7/24/2022
1.1.10 485 7/23/2022
1.0.29.3202 503 7/7/2022
1.0.20.52556 471 6/30/2022
1.0.8.35854 520 6/26/2022
1.0.3.8772 483 6/24/2022
1.0.1.57221 494 6/23/2022
0.0.0 501 6/16/2022