nanoFramework.Iot.Device.Sps30 1.1.696

Prefix Reserved
There is a newer version of this package available.
See the version list below for details.
dotnet add package nanoFramework.Iot.Device.Sps30 --version 1.1.696
                    
NuGet\Install-Package nanoFramework.Iot.Device.Sps30 -Version 1.1.696
                    
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package.
<PackageReference Include="nanoFramework.Iot.Device.Sps30" Version="1.1.696" />
                    
For projects that support PackageReference, copy this XML node into the project file to reference the package.
<PackageVersion Include="nanoFramework.Iot.Device.Sps30" Version="1.1.696" />
                    
Directory.Packages.props
<PackageReference Include="nanoFramework.Iot.Device.Sps30" />
                    
Project file
For projects that support Central Package Management (CPM), copy this XML node into the solution Directory.Packages.props file to version the package.
paket add nanoFramework.Iot.Device.Sps30 --version 1.1.696
                    
#r "nuget: nanoFramework.Iot.Device.Sps30, 1.1.696"
                    
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package.
#:package nanoFramework.Iot.Device.Sps30@1.1.696
                    
#:package directive can be used in C# file-based apps starting in .NET 10 preview 4. Copy this into a .cs file before any lines of code to reference the package.
#addin nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.696
                    
Install as a Cake Addin
#tool nuget:?package=nanoFramework.Iot.Device.Sps30&version=1.1.696
                    
Install as a Cake Tool

Sensirion SPS30 Particulate Matter Sensor

This is a library to interact with the Sensirion SPS30 Particulate Matter Sensor. Currently, only the UART interface using the SHDLC protocol is implemented. The SPS30 also supports I2C.

sps30-image.png

Documentation

  • The datasheet for this sensor can be found here

Usage for the UART interface

Important: make sure you properly setup the UART pins for ESP32 before creating the SerialPort. For this, make sure you install the nanoFramework.Hardware.Esp32 NuGet and use the Configuration class to configure the pins:

Configuration.SetPinFunction(4, DeviceFunction.COM2_TX);
Configuration.SetPinFunction(15, DeviceFunction.COM2_RX);

Initialize the SerialPort, wrap it in the ShdlcProtocol, then pass to the Sps30Sensor:

var serial = new SerialPort("COM2", 115200, Parity.None, 8, StopBits.One);
var shdlc = new ShdlcProtocol(serial, timeoutInMillis: 10000);
var sps30 = new Sps30Sensor(shdlc);

Use the sps30 to interact with the sensor, e.g.:

var version = sps30.ReadVersion();
Debug.WriteLine($"SPS30 detected: {version}");

Collect a measurement reliably:

try { sps30.StopMeasurement(); } catch { } // In case already measuring from a previous run
sps30.StartMeasurement(MeasurementOutputFormat.Float);
Thread.Sleep(5000); // SPS30 requires some time before it can sample data
var measurement = sps30.ReadMeasuredValues();
Debug.WriteLine($"Measurement: {measurement}");

The above would output the following:

SPS30 detected: ID=00080000, serial=4E1AD1BB796C64C5, version=Firmware V2.1, Hardware V7, SHDLC V2.0, status=RawRegister: 0, FanSpeedOutOfRange: False, LaserFailure: False, FanFailureBlockedOrBroken: False, cleaninginterval=604800
Measurement: MassConcentration [µg/m³] PM1.0=2.00064229965, PM2.5=5.78215932, PM4.0=8.74958038, PM10.0=9.3430643, NumberConcentration [#/cm³] PM0.5=5.54537582, PM1.0=12.034433364, PM2.5=15.72880268, PM4.0=16.44550895, PM10.0=16.58645629, TypicalParticleSize[nm]=675.40591955

Check out the sample for more information.

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last Updated
1.1.880 183 4/24/2025
1.1.869 193 4/2/2025
1.1.864 186 4/2/2025
1.1.852 187 3/11/2025
1.1.846 187 3/10/2025
1.1.838 133 3/3/2025
1.1.822 142 2/26/2025
1.1.790 131 2/5/2025
1.1.775 139 2/4/2025
1.1.772 143 2/4/2025
1.1.755 130 1/31/2025
1.1.743 127 1/20/2025
1.1.737 113 1/13/2025
1.1.729 111 1/8/2025
1.1.718 122 12/30/2024
1.1.704 125 12/18/2024
1.1.696 121 12/16/2024
1.1.673 135 10/23/2024
1.1.662 143 10/11/2024
1.1.656 128 10/3/2024
1.1.639 158 9/6/2024
1.1.631 130 8/28/2024
1.1.613 158 8/9/2024
1.1.601 125 7/26/2024
1.1.590 143 7/17/2024
1.1.573 154 6/19/2024
1.1.570 148 6/14/2024
1.1.548 139 5/15/2024
1.1.536 148 4/15/2024
1.1.514 157 3/22/2024
1.1.494 139 2/28/2024
1.1.462 240 1/5/2024
1.1.458 168 12/20/2023
1.1.436 172 11/10/2023
1.1.416 135 11/8/2023
1.1.403 161 10/6/2023
1.1.396 161 9/27/2023
1.1.384 167 9/6/2023
1.1.378 179 8/16/2023
1.1.369 181 8/2/2023
1.1.363 178 7/28/2023
1.1.357 192 7/19/2023
1.1.354 182 7/14/2023
1.1.345 172 6/21/2023
1.1.341 176 6/14/2023
1.1.337 179 6/7/2023
1.1.335 171 6/2/2023
1.1.329 175 5/26/2023
1.1.313 182 5/12/2023
1.1.302 176 5/10/2023
1.1.297 179 5/3/2023
1.1.273 254 3/17/2023
1.1.267 270 3/10/2023
1.1.263 263 3/8/2023
1.1.259 292 2/27/2023
1.1.256 302 2/24/2023
1.1.253 293 2/22/2023
1.1.222 341 1/9/2023
1.1.212 333 1/5/2023
1.1.208 336 1/3/2023
1.1.203 347 12/28/2022
1.1.159 414 11/14/2022
1.1.158 387 11/13/2022
1.1.153 401 11/5/2022
1.1.141 432 10/25/2022
1.1.128 428 10/22/2022
1.1.117 457 10/10/2022
1.1.114 446 10/8/2022
1.1.89 467 9/16/2022
1.1.87 524 9/15/2022
1.1.63 443 9/3/2022
1.1.47 466 8/15/2022
1.1.40 471 8/6/2022
1.1.38 477 8/5/2022
1.1.35 450 8/4/2022
1.1.28 463 8/1/2022
1.1.13 473 7/24/2022
1.1.10 463 7/23/2022
1.0.29.3202 480 7/7/2022
1.0.20.52556 448 6/30/2022
1.0.8.35854 496 6/26/2022
1.0.3.8772 461 6/24/2022
1.0.1.57221 471 6/23/2022
0.0.0 479 6/16/2022