nanoFramework.Iot.Device.Sht3x 1.0.288-preview.87

Prefix Reserved
.NET Framework This package is compatible with all versions of .NET Framework.
This is a prerelease version of nanoFramework.Iot.Device.Sht3x.
There is a newer version of this package available.
See the version list below for details. 
dotnet add package nanoFramework.Iot.Device.Sht3x --version 1.0.288-preview.87                

                    
                

            
NuGet\Install-Package nanoFramework.Iot.Device.Sht3x -Version 1.0.288-preview.87
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="nanoFramework.Iot.Device.Sht3x" Version="1.0.288-preview.87" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
paket add nanoFramework.Iot.Device.Sht3x --version 1.0.288-preview.87                

                    
                

            
#r "nuget: nanoFramework.Iot.Device.Sht3x, 1.0.288-preview.87"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
// Install nanoFramework.Iot.Device.Sht3x as a Cake Addin
#addin nuget:?package=nanoFramework.Iot.Device.Sht3x&version=1.0.288-preview.87&prerelease

// Install nanoFramework.Iot.Device.Sht3x as a Cake Tool
#tool nuget:?package=nanoFramework.Iot.Device.Sht3x&version=1.0.288-preview.87&prerelease

SHT3x - Temperature & Humidity Sensor

SHT3x is the next generation of Sensirion’s temperature and humidity sensors. This project supports SHT30, SHT31 and SHT35.

Documentation

Board

Sensor

Circuit diagram

Usage

Hardware Required

  • SHT3x
  • Male/Female Jumper Wires

Circuit

  • SCL - SCL
  • SDA - SDA
  • VCC - 5V
  • GND - GND
  • ADR - GND

Code

Important: make sure you properly setup the I2C pins especially for ESP32 before creating the I2cDevice, make sure you install the nanoFramework.Hardware.ESP32 nuget:

//////////////////////////////////////////////////////////////////////
// when connecting to an ESP32 device, need to configure the I2C GPIOs
// used for the bus
Configuration.SetPinFunction(21, DeviceFunction.I2C1_DATA);
Configuration.SetPinFunction(22, DeviceFunction.I2C1_CLOCK);

For other devices like STM32, please make sure you're using the preset pins for the I2C bus you want to use.

I2cConnectionSettings settings = new I2cConnectionSettings(1, (byte)I2cAddress.AddrLow);
I2cDevice device = I2cDevice.Create(settings);

using (Sht3x sensor = new Sht3x(device))
{
    // read temperature (℃)
    double temperature = sensor.Temperature.Celsius;
    // read humidity (%)
    double humidity = sensor.Humidity;
    // open heater
    sensor.Heater = true;
}

Result

Sample result

Product Compatible and additional computed target framework versions.
.NET Framework net is compatible. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
1.2.696 81 12/16/2024
1.2.673 102 10/23/2024
1.2.656 103 10/3/2024
1.2.639 122 9/6/2024
1.2.631 102 8/28/2024
1.2.613 122 8/9/2024
1.2.601 90 7/26/2024
1.2.590 100 7/17/2024
1.2.573 121 6/19/2024
1.2.570 108 6/14/2024
1.2.536 145 4/15/2024
1.2.514 140 3/22/2024
1.2.494 140 2/28/2024
1.2.480 148 1/30/2024
1.2.478 117 1/26/2024
1.2.462 186 1/5/2024
1.2.458 160 12/20/2023
1.2.436 199 11/10/2023
1.2.416 125 11/8/2023
1.2.403 154 10/6/2023
1.2.396 148 9/27/2023
1.2.384 160 9/6/2023
1.2.378 166 8/16/2023
1.2.369 161 8/2/2023
1.2.363 162 7/28/2023
1.2.357 166 7/19/2023
1.2.354 168 7/14/2023
1.2.345 185 6/21/2023
1.2.341 163 6/14/2023
1.2.337 173 6/7/2023
1.2.335 158 6/2/2023
1.2.329 147 5/26/2023
1.2.316 165 5/16/2023
1.2.313 172 5/12/2023
1.2.302 175 5/10/2023
1.2.297 178 5/3/2023
1.2.273 265 3/17/2023
1.2.267 245 3/10/2023
1.2.263 271 3/8/2023
1.2.259 303 2/27/2023
1.2.256 270 2/24/2023
1.2.253 272 2/22/2023
1.2.222 298 1/9/2023
1.2.217 330 1/6/2023
1.2.208 304 1/3/2023
1.2.203 315 12/28/2022
1.2.159 389 11/14/2022
1.2.158 371 11/13/2022
1.2.153 405 11/5/2022
1.2.141 427 10/25/2022
1.2.128 422 10/22/2022
1.2.87 541 9/15/2022
1.2.63 466 9/3/2022
1.2.47 455 8/15/2022
1.2.40 456 8/6/2022
1.2.38 444 8/5/2022
1.2.28 472 8/1/2022
1.2.13 471 7/24/2022
1.2.10 461 7/23/2022
1.1.142.3202 473 7/7/2022
1.1.133.52556 467 6/30/2022
1.1.121.35854 463 6/26/2022
1.1.116.8772 457 6/24/2022
1.1.113.2032 448 6/23/2022
1.1.102.51394 458 6/15/2022
1.1.99.36719 429 6/14/2022
1.1.72.29765 470 5/31/2022
1.1.61.27737 483 5/25/2022
1.1.58.10097 441 5/23/2022
1.1.54.28879 443 5/23/2022
1.1.40 471 5/5/2022
1.1.11 484 4/19/2022
1.1.3 477 4/15/2022
1.1.1 460 4/14/2022
1.0.300 471 4/3/2022
1.0.288-preview.114 125 3/25/2022
1.0.288-preview.113 121 3/25/2022
1.0.288-preview.103 111 3/21/2022
1.0.288-preview.100 116 3/19/2022
1.0.288-preview.99 126 3/18/2022
1.0.288-preview.94 127 3/15/2022
1.0.288-preview.87 119 3/10/2022
1.0.288-preview.77 132 2/27/2022
1.0.288-preview.75 117 2/26/2022
1.0.288-preview.63 116 2/16/2022
1.0.288-preview.61 123 2/12/2022
1.0.288-preview.58 119 2/10/2022
1.0.288-preview.53 115 2/9/2022
1.0.288-preview.48 138 2/4/2022
1.0.288-preview.41 136 1/31/2022
1.0.288-preview.20 133 1/27/2022
1.0.288-preview.18 136 1/27/2022
1.0.288-preview.5 129 1/24/2022
1.0.272 483 1/10/2022
1.0.259 346 12/9/2021
1.0.258 324 12/7/2021
1.0.157 372 9/4/2021
1.0.155 362 8/31/2021
1.0.153 370 8/14/2021
1.0.151 387 8/6/2021
1.0.146 328 7/22/2021
1.0.136 421 7/17/2021
1.0.135 176 7/16/2021
1.0.134 187 7/15/2021
1.0.133 197 7/14/2021
1.0.131 174 7/8/2021
1.0.130 165 7/6/2021
1.0.129 171 7/6/2021
1.0.127 191 7/5/2021
1.0.125 202 7/5/2021
1.0.122 220 6/30/2021
1.0.121 207 6/29/2021
1.0.119 234 6/28/2021
1.0.111 188 6/14/2021
1.0.105 177 5/29/2021
1.0.104 258 5/29/2021
1.0.97 180 5/28/2021
1.0.68 200 5/26/2021