SiglentSCPI 1.0.1

.NET 6.0 This package targets .NET 6.0. The package is compatible with this framework or higher. 
dotnet add package SiglentSCPI --version 1.0.1                

                    
                

            
NuGet\Install-Package SiglentSCPI -Version 1.0.1
This command is intended to be used within the Package Manager Console in Visual Studio, as it uses the NuGet module's version of Install-Package. 
<PackageReference Include="SiglentSCPI" Version="1.0.1" />
For projects that support PackageReference, copy this XML node into the project file to reference the package. 
paket add SiglentSCPI --version 1.0.1                

                    
                

            
#r "nuget: SiglentSCPI, 1.0.1"
#r directive can be used in F# Interactive and Polyglot Notebooks. Copy this into the interactive tool or source code of the script to reference the package. 
// Install SiglentSCPI as a Cake Addin
#addin nuget:?package=SiglentSCPI&version=1.0.1

// Install SiglentSCPI as a Cake Tool
#tool nuget:?package=SiglentSCPI&version=1.0.1

A C# library for the Siglent SPD3303X Series Bench Supply,it does not utilize the Ni Visa Driver/API

  • Command Set for Siglent`s SPD3303X-E as listed on the user manual

The following commands is what its implemented on the library.

Getters

Command Expected return Notes DataType Type Unit
*IDN? {Vendor},{ModelNumber},{SerialNumber},{Firmware Version},{Hardware Revision} theMostUniversalCommand String Getter N/D
INSTrument? CHx Gets The Active Channel String Getter N/D
MEASure:CURRent? CHx 0.00 ADC reading Float Getter A
MEASure:VOLTage? CHx 0.00 ADC reading Float Getter V
MEASure:POWEr? CHx 0.00 ADC reading or instrument calc Float Getter W
CHx:CURRent? 0.00 Set value Float Getter A
CHx:VOLTage? 0.00 Set value Float Getter V
SYSTem:STATus? 0xSOMETHING see "SystemStatus" Table for details HEX Getter N/D

Setters

Command Expected return Notes DataType Type Unit
INSTrument CHx n/a - - Setter N/D
CHx:CURRent {VAL} n/a sets the CC Float Setter A
CHx:VOLTage {VAL} n/a sets the output Voltage Float Setter V
OUTPut CHx,{ON/OFF} n/a Turn on/off the specified channel - Setter N/D
OUTPut:TRACK {0/1/2} n/a Sets the channel mode on Indie, Serial or Paralel - Setter N/D
OUTPut:WAVE CHx,{ON/OFF} n/a Turn on/off the Waveform Display function of specified channel. - Setter N/D
*SAV {1/2/3/4/5} n/a Save current state in nonvolatile memory - Setter N/D
*RCL {1/2/3/4/5} n/a Recall state that had been saved from nonvolatile memory. - Setter N/D
  • IP setup

Getters

Command Expected return Description Type
DHCP? DHCP:ON Query whether the automatic network parameters configuration function is turn on Getter
IPaddr? 192.168.0.106 Query the current IP address of the instrument Getter
MASKaddr? 255.255.255.0 Query the current subnet mask of the instrument Getter
GATEaddr? 192.168.0.1 Query the current gateway of the instrument Getter

Setters

Command Expected return Description Type
DHCP {ON/OFF} n/a Assign the network parameters (such as the IP address)for the instrument automatically. Setter
IPaddr {IP address} n/a Assign a static Internet Protocol (IP) address for the instrument Note,Invalid when DHCP is on Setter
MASKaddr {NetMasK} n/a Assign a subnet mask for the instrument Note,Invalid when DHCP is on Setter
GATEaddr {GateWay} n/a Assign a gateway for the instrument Note,Invalid when DHCP is on Setter

Using the SYSTem:STATus? Command

THis command sums up the current status of the instrument , in to a hex that you have to proccses based on this :

The return info is hexadecimal format, but the actual state is binary, so you must change the return info into a binary. The state correspondence relationship is as follow

Bit No. Corresponding State
0 0: CH1 CV mode; 1:CC Mode
1 0: CH2 CV mode; 1: CH2 CC mode
2,3 01: Independent mode; 10: Parallel mode 11:Series Mode (fromMemory)
4 0: CH1 OFF 1: CH1 ON
5 0: CH2 OFF 1: CH2 ON
6 0: TIMER1 OFF 1: TIMER1 ON
7 0: TIMER2 OFF 1: TIMER2 ON
8 0: CH1 digital display; 1: CH1 waveform diplay
9 0: CH2 digital display; 1: CH2 waveform diplay

example:

  • Base (CV/CV,Indie mode, CH1 off, CH2 OFF Timers off CH1/CH2 Digital Display) : 0x4
  • CH1ON: 0x14
  • CH2ON: 0x24
  • Serial: 0xc

The Siglent name is a registered trademark of SIGLENT TECHNOLOGIES CO., LTD, in the United States and/or other countries. All other trademarks referenced in the Software or Documentation are the property of their respective owners.

This is an unofficial implementation. Usage of the Siglent name does not confer in any way, implied or otherwise,
endorsement by or association with SIGLENT TECHNOLOGIES CO., LTD.

Product Compatible and additional computed target framework versions.
.NET net6.0 is compatible.  net6.0-android was computed.  net6.0-ios was computed.  net6.0-maccatalyst was computed.  net6.0-macos was computed.  net6.0-tvos was computed.  net6.0-windows was computed.  net7.0 was computed.  net7.0-android was computed.  net7.0-ios was computed.  net7.0-maccatalyst was computed.  net7.0-macos was computed.  net7.0-tvos was computed.  net7.0-windows was computed.  net8.0 was computed.  net8.0-android was computed.  net8.0-browser was computed.  net8.0-ios was computed.  net8.0-maccatalyst was computed.  net8.0-macos was computed.  net8.0-tvos was computed.  net8.0-windows was computed. 
Compatible target framework(s)
Included target framework(s) (in package)
Learn more about Target Frameworks and .NET Standard.

  • net6.0

    • No dependencies.

NuGet packages

This package is not used by any NuGet packages.

GitHub repositories

This package is not used by any popular GitHub repositories.

Version Downloads Last updated
1.0.1 360 10/4/2022
1.0.0 173 10/4/2022